<<
Bleed-Thru Markers
IM-14
<< All Product Lines
IM-14
Bleed-Thru Markers
Formulated to effectively bleed through oil-based primers and top coats layed over marks!
IM-14
Permanent Ink Marker Designed to Bleed Through Oil-based Primers

Cap Image:
Cap
Tips available for this pen:
Chisel
Valve Assembly Patent : 7,086,799

Marks on unpainted metals will bleed through primers and top coat before a sealant is applied. Remember to keep the tip saturated for proper bleed-thru capability. IM-13, IM-14, & IM-15 are to be used with oil-based primers. IM-63 is to be used with water-based primers. To seal your marks and stop bleed through on IM-13, 14, and 15, you must apply a water-based or alcohol based sealant. To stop bleed through on IM-63, you must use an oil-based sealant.

Product Line
Bleed-Thru Markers
Stroke Width
1.2mm Fine Edge, 4.2mm Medium Edge, 7.2mm Broad Edge
Packed Quantities
6 per box, 72 per carton
Paint/Ink Contents
22ml
Solvent System
Xylene-based Ink
Name
IM-14
Size
Jumbo
Replacement Nibs
00140 Acrylic Chisel Nib
Marking Temperature Range
Use at -40F to 150F (-40C to 66C)
Hazmat Information
Flammable
Exclamation
Cancer
Prop65 Warning
Our products are not corrosive to metal. For Industrial use only. Keep away from children. WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov.
Will Bleed Through Paint
Are you searching for one of our printable documents?
Please check our file directories below.